High Quality Antistatic PVC Table Mat ESD Work Mat for Electronics
Factory 1.0mx*10mx*2mm
The ESD PVC flame retardant mat is a type of floor mat made of PVC
material, specifically designed to prevent electrostatic discharge
(ESD) and resist flames. Its main use is in environments that are
susceptible to static electricity, such as electronic equipment
manufacturing, data centers, and laboratories.
ESD PVC flame retardant mat is a type of floor mat that offers a
versatile safety solution to prevent electrostatic discharge and
fire. It is available in varying sizes, customizable, and is an
essential safety tool in industries that deal with electronic
components.
These mats are equipped with high electrical resistance, which
prevents the accumulation and discharge of static electricity. They
are also flame retardant, which means that they can resist flames
and prevent fires from starting or spreading. ESD PVC flame
retardant mats are available in different sizes and can be
customized to match various work areas.
In industries such as electronic component manufacturing, data
centers, and laboratories, ESD PVC flame retardant mats are
considered a fundamental safety measure. They provide additional
protection against the harmful effects of static electricity on
sensitive electronic devices, while also reducing the risk of fire
in the workplace. Furthermore, these mats can also serve as a
preventive measure against accidents and injuries, such as slips or
trips on hard surfaces.
| Antistatic PVC Table Mat ESD Work Mat |
| Construction Material: | PVC |
| Color: | blue,grey or customised |
| Normal size(roll): | 1.0mx*10mx*2mm(T); 1.2mx*10mx*2mm(T) or customised |
| Two layers: | Static Dissipation layer + Conductive layer |
| Surface: | Shiny or dull or lines |
| Function: | Flame Retardant,Antistatic |
| Feature: | Environmentally friendly, tasteless, antistatic, bending, aging
resistant and tear resistant. |
| Remarks: | Above sizes are standard, customized size available. |
Some of the Characteristics are as follows:
| Dissipative Table Mat/Floor Mat | Specification | Color |
| Static Dissipation layer | Surface resistance | 106-109 | 1.2mx*10mx*2mm(T)
1.0mx*10mx*2mm(T)
or customised | yellow,blue,grey or customised |
| Friction static potential V | ＜100 |
| Conductive layer (black bottom) | Surface resistance | ≤105 |
| Friction static potential V | ＜60 |
| Static voltage attenuation period | 5000 – 500V | ＜1s |
| Flame retardation | GB4609-84, FV-0 (less than 10S) |
| Volume resistance | 105-108Ωcm |
| Physical performance index of Dissipative Table/Floor Mat |
| No. | Description | Test reference | Results |
| 1 | Tensile strength | GB 1040 | 3.6Mpa |
| 2 | Fracture elongation | GB 1040 | 188% |
| 3 | Tear elongation | GB/T 529 | 20.6KN/m |
| 4 | Rebound elasticity (the specimen is laminated with 6 layers of
sheets) | GB/T 1681 | 14% |
| 5 | Impact embrittlement temperature (no cut) | GB 5470 | No damage |
| at -25℃ |
| 6 | Permanent compression change rate, 70oC*22h, compression 25% | GB 10654 | 17.90% |
| 7 |
Hot air ageing | Tensile strength change rate |
GB/T 7141 | 8.00% |
| Fracture elongation change rate | -3.80% |
| Weight loss on heating | 1.08% |
| Remarks | Test according to national standards: GB 1040, GB/T 529, GB/T 1671,
GB 5470, GB 10654 and GB/T 7141. |
ESD PVC flame-retardant floor mats are suitable for the following
scenarios:
1.Electronic component manufacturing industry: In the process of
manufacturing electronic components, electrostatic discharge may
cause damage to sensitive electronic devices. The use of
anti-static mats can prevent electrostatic discharge and protect
electronic components from damage.
2.Data center: There are usually a large number of electronic
devices and cables in the data center, and there may also be a risk
of fire. The use of anti-static and flame-retardant floor mats can
protect electronic equipment and reduce fire risk.
3.Laboratory: Laboratories typically require the use of
high-precision electronic equipment, which is highly sensitive to
static electricity and fire. The use of anti-static and
flame-retardant floor mats can protect these devices while ensuring
the safety of the laboratory.
4.Medical facilities: In medical facilities, electronic devices are
usually used to monitor the vital signs of patients. The use of
anti-static and flame-retardant floor mats can protect these
devices while ensuring the safety of medical facilities.
5.Factories and workshops: There may be electrostatic discharge and
fire risks in factories and workshops. The use of anti-static and
flame-retardant floor mats can protect the safety of workers while
ensuring the safety and stability of the production environment.
6.In summary, ESD PVC flame-retardant floor mats are suitable for
many places that require electrostatic discharge prevention and
fire prevention, such as electronic component manufacturing, data
centers, laboratories, medical facilities, factories, and
workshops.
Picture:
Other Products we Supply
- ESD Fabric
- Cleanroom Apparels
- Cleanroom Cleaning Supplies(Wipes, Tacky Rollers, Mops, Brushes,
Swabs),
- Cleanroom &ESD Chairs/Stools,
- Cleanroom Documentation(Paper, Pen, Notebook),
- Cleanroom Gloves(Finger Cots, PU Coated Glove, PVC Dotted Glove)
- Cleanroom Mats(Sticky Mat, Table/Floor Mat, Anti-fatigue Mat),
- ESD Package Materials(Bags, Tapes etc),
- ESD Storage Materials (Bins, Trays, Circulation Box, Solvent
Dispensers),
- ESD Wrist/Heel Straps/Grounding Cords.
- Static Control Ionizing Blower/Gun/Nozzle,
- Illuminated Magnifier,
- Cleanroom Curtain and etc
